Read the forum code of contact
By: 25th May 2019 at 02:17 Permalink
-270+ views & no one has a clue? Are there no UK aircraft restorers/mechanics on here?
By: 25th May 2019 at 06:44 Permalink
-It very much depends on whether the aircraft in question still has the technical support of the original manufacturer. i.e. Cessna or a subsequent company that's holds the design authority, i.e. Textron, these are operated with a CAA or EASA Certificate of Airworthiness, or in the case of some warbird types a CAA Permit to Fly, and have to be worked on by an approved organisation with suitably qualified engineers. For older aircraft this can still be the case. However, where there's no continuation then the aircraft are considered orphans and as such most are operated on a Permit to Fly, the administration of which is delegated by the CAA to the Light Aircraft Association. For these types, certain aspects of the aircraft's maintenance schedule, or repairs, can be performed by the owner, or a suitably experienced individual, under the supervision of an engineering inspector. However, there are weight and powerplant limitations to this arrangement, and I would expect most of the lighter types at Old Warden would be on an LAA Permit to Fly, the more powerful or complex types such as the Comet, Provost, Spitfire, Lysander, etc. would be operated on a CAA Permit to Fly.
By: 25th May 2019 at 16:47 Permalink
-Great OP to a subject area I seek clarity on also, so what's the best approach to gaining skills to work on the Certificates of airworthiness and CAA permit to fly types of warbird aircraft? Is it to get a grounding working on older ga types cessna piper etc ? Would there be formal qualifications neccessary (i.e. relevant to vintage types) and which ones (EASA? ) for airframe and powerplant? Or is it better to get involved on the lighter PFA types
By: 25th May 2019 at 18:26 Permalink
-Best way is to have experience of working on anything and apply to see how far you can get. Experience in types is getting harder and harder to find. Ideally wood and fabric or metal working skills preferred over license requirements.
By: 25th May 2019 at 18:39 Permalink
-OK, it appears as I suspected that refreshingly, unlike many things in this increasingly regulated world, it's not about the piece of paperwork qualification you have but about the actual demonstratable skills - but as you say getting skills is harder and harder
can anybody suggest anywhere in the north west of England where classic aircraft restoration and operation is underway as from what ive seen it is particularly absent up here?
By: 25th May 2019 at 19:53 Permalink
-It very much depends on whether the aircraft in question still has the technical support of the original manufacturer. i.e. Cessna or a subsequent company that's holds the design authority, i.e. Textron, these are operated with a CAA or EASA Certificate of Airworthiness, or in the case of some warbird types a CAA Permit to Fly, and have to be worked on by an approved organisation with suitably qualified engineers. For older aircraft this can still be the case. However, where there's no continuation then the aircraft are considered orphans and as such most are operated on a Permit to Fly, the administration of which is delegated by the CAA to the Light Aircraft Association. For these types, certain aspects of the aircraft's maintenance schedule, or repairs, can be performed by the owner, or a suitably experienced individual, under the supervision of an engineering inspector. However, there are weight and powerplant limitations to this arrangement, and I would expect most of the lighter types at Old Warden would be on an LAA Permit to Fly, the more powerful or complex types such as the Comet, Provost, Spitfire, Lysander, etc. would be operated on a CAA Permit to Fly.
What about the license for the mechanic? I saw something about BCAR(?) but it was a bit vague.
By: 25th May 2019 at 19:58 Permalink
-Best way is to have experience of working on anything and apply to see how far you can get. Experience in types is getting harder and harder to find. Ideally wood and fabric or metal working skills preferred over license requirements.
Last time I had to come up with a list covering *experience* I ended up with 70 different types from 12 different countries.. which was WAY more than I was thinking before I sat down to come up with the list. There was some rare stuff (N3N, Sipa 200, Reno Unlimiteds etc).
By: 27th May 2019 at 12:12 Permalink
-OK, so clarity sake taking a familiar example Supermarine Spitfire in UK operation is it a CAA CofA or CAA PtF aircraft ? what formal qualifications does each of the following require:
Volunteer (unpayed) rookie (is this legally allowed if an approved maintenance org is stipulated for type/ are there work arounds ?)
Employed mechanic
Employed inspector
Chief Tech
By: 27th May 2019 at 15:43 Permalink
-OK, so clarity sake taking a familiar example Supermarine Spitfire in UK operation is it a CAA CofA or CAA PtF aircraft ? what formal qualifications does each of the following require:Volunteer (unpayed) rookie (is this legally allowed if an approved maintenance org is stipulated for type/ are there work arounds ?)
Employed mechanic
Employed inspector
Chief Tech
Volunteer just needs to be mechanically apt, but there's a whole list of stuff they're not allowed to do (inspections, sign stuff off etc)
Chief Tech would be the Pete Rushens & John Romains of the world. Pete was RAF & BBMF, I think John did some kind of apprenticeship?.. However, I'm not familiar with what pieces of wallpaper or licenses they have.
By: 27th May 2019 at 19:16 Permalink
-All warbird Spitfires in the U.K. are operating on CAA PtF, signatories on these hold company authorisations issued by the overseeing Part 23/25 organisation responsible for the maintenance. Acceptance to hold those authorisations are granted to candidates with suitable knowledge and experience on type. Other non-signatory engineers are permitted to work on these types under supervision.
FB
By: 27th May 2019 at 19:26 Permalink - Edited 27th May 2019 at 19:28
-All warbird Spitfires in the U.K. are operating on CAA PtF, signatories on these hold company authorisations issued by the overseeing Part 23/25 organisation responsible for the maintenance. Acceptance to hold those authorisations are granted to candidates with suitable knowledge and experience on type. Other non-signatory engineers are permitted to work on these types under supervision.FB
So a persons ability to work on & sign off work is dependent on the company they work for? Would someone who works at (ferinstance) Duxford for *Company A* on Spitfires not be allowed to freelance at another airfield for a private owner & work on his Spitfire? Under FAA regs I could fly to the UK, perform & sign off a 100hr inspection on a P51 that was registered in the US.
By: 27th May 2019 at 22:21 Permalink
-All warbird Spitfires in the U.K. are operating on CAA PtF, signatories on these hold company authorisations issued by the overseeing Part 23/25 organisation responsible for the maintenance. Acceptance to hold those authorisations are granted to candidates with suitable knowledge and experience on type. Other non-signatory engineers are permitted to work on these types under supervision.FB
Thanks for the info - just to be clear can you clarify; is it the Part 23/25 organisation or the CAA that grants these authorisations to candidates?
By: 28th May 2019 at 08:17 Permalink
-First answer, no you can’t freelance. You are signing on a company approval and therefore any aircraft worked on has to have a maintenance agreement with a part 23/25.
Second answer, mech stamps up to Release to service sign offs are approved internally within the company by the chief Engineer and Accountable manager and where needed with any guidance from the Quality manager. Permit Renewal authorisations are only approved by the CAA. Most U.K. organisations will only have 1 or 2 individuals within it who have a permit renewal authorisation.
if you are really interested in such things download CAP 1640 from the CAA website - dem is da rules innit.
By: 28th May 2019 at 19:26 Permalink
-if you are really interested in such things download CAP 1640 from the CAA website - dem is da rules innit.
That's what I was looking for :)
Altho when I googled "CAP 1640" it returned a bunch of links of a painting by Rembrant in 1640 featuring some sort of hat.. :)
By: 29th May 2019 at 13:14 Permalink - Edited 29th May 2019 at 14:08
-My BCAR licences covers all piston engines, in any aircraft, however I would be a fool to say sign off at multi row radial without having worked on it and gained experience..
Interesting when you mentioned
Last time I had to come up with a list covering *experience* I ended up with 70 different types from 12 different countries.. which was WAY more than I was thinking before I sat down to come up with the list. There was some rare stuff (N3N, Sipa 200, Reno Unlimiteds etc).
The EU a operate group coverage system as in a way did BCARs
On my EASA Licences
Now not counting the odds and sods I hold outside these groups, I hold amongst other things, group 3 and group 2a.
List here https://www.easa.europa.eu/easa-and-...enance-licence
Start counting from 908 and finish at 2041....that alone is 1,133 variations of aircraft and or engine combinations on my licence! and to be honest, I read though a lot of them and had to look them up on the web to see what they were.
When I went through my experience list though I probably came up with a similar amount, if not a few more. Rarer stuff includes L39's, Fuga, Spits, Chippies, Stearman, Devons and Mustangs, I even did the radio racking for the Virgin trans some sea/ocean balloon flight, though I think mine came down in the drink, so we don't mention that one :o.
By: 29th May 2019 at 15:53 Permalink
-Several years back the FAA decided to issue type ratings instead of LOA's for warbirds. Big meeting at Reno..
FAA bloke says "You need 5 takeoffs & landings for a type rating"
Art Vance stands up & says "I've got 5 takeoffs, 4 landings & a bail out in a Corsair, does that count?"
After everyone stopped laughing & some discussion it was decided that it did.
By: 29th May 2019 at 16:02 Permalink
-My BCAR licences covers all piston engines, in any aircraft, however I would be a fool to say sign off at multi row radial without having worked on it and gained experience..Interesting when you mentioned
The EU a operate group coverage system as in a way did BCARs
On my EASA Licences
Now not counting the odds and sods I hold outside these groups, I hold amongst other things, group 3 and group 2a.
List here https://www.easa.europa.eu/easa-and-...enance-licence
Start counting from 908 and finish at 2041....that alone is 1,133 variations of aircraft and or engine combinations on my licence! and to be honest, I read though a lot of them and had to look them up on the web to see what they were.
When I went through my experience list though I probably came up with a similar amount, if not a few more. Rarer stuff includes L39's, Fuga, Spits, Chippies, Stearman, Devons and Mustangs, I even did the radio racking for the Virgin trans some sea/ocean balloon flight, though I think mine came down in the drink, so we don't mention that one :o.
According to that list I may have to rethink my list. I included all models of Bonanza as one type, not the 4 different models I've worked on.. altho with that said it was one each of four models... one or two times (couple of weeks or so for Annuals or 100hr). I think for the sake of simplicity I'll keep *Bonanza* as one type/model
By: 29th May 2019 at 16:24 Permalink
-Before we joined LaLa Land life was so much easier, we Brits did it on max take off weight, then if metal, if pressurised etc or retracts etc, So it your licence covered say below 5700KG MTW a retractable and pressurised every aircraft under that was covered, similar with engines.
Then we got the system above and everytime a company is sold they update the list, so Cessna becomes Textron etc, and early on they would shuffle aircraft around into different categories so you never knew where you were.
By: 29th May 2019 at 18:34 Permalink
-It's a shame the CAA doesn't come up with something that mirrors the the FAA Experimental/Exhibition category for aircraft. It makes life so much simpler in the US.
Posts: 4,796
By: ZRX61 - 22nd May 2019 at 16:10
What's the current deal? Is it covered by the CAA or EASA regs? Question came up on a FB mechanic group after a position for Maintenance/Restoration Grand Poobah at Old Warden was posted.