Read the forum code of contact
By: 22nd December 2018 at 20:17 Permalink
-I got a Marconi T1154 B transmitter that is missing it's acess cover with the frequency chart on the front and the fuses on the back. Any out there?
By: 22nd December 2018 at 20:39 Permalink
-Am on the lookout for Jaguar GR.1 parts, both airframe and cockpit although my cockpit shopping list is not too long.
By: 5th February 2019 at 18:38 Permalink - Edited 2nd October 2019 at 14:50
-HAWKER TEMPEST/TYPHOON
This is probably going to be a long shot but I'm looking for a set of Hawker Tempest V, series 1, front wing spars for an up and coming project details of which will be posted separately.
I currently have a set of Hawker Tempest II front wing spars. Unless I can find the correct ones I will have to use the Tempest II one's
Am also looking for Typhoon/Tempest parts that can be added to a cockpit rebuild such as tubes either broken or complete. I have some Typhoon, Spitfire and Hurricane parts to trade..
By: 5th February 2019 at 20:27 Permalink
-Looking for a Chipmunk Propeller
.
Have lots of other chipmunk bits to trade
By: 5th February 2019 at 21:26 Permalink - Edited 5th February 2019 at 21:27
-Looking for a Chipmunk Propeller
.Have lots of other chipmunk bits to trade
I found a Chipmunk prop in California recently but the guy wanted silly money for it Dave
By: 5th February 2019 at 22:10 Permalink
-I'm looking for parts of the two mig-29's from the fairford crash in 1993.
By: 5th February 2019 at 22:28 Permalink
-A very long shot, but I am looking for Japanese WW2 instruments - in particular any engine related instruments. I have WW2 Japanese, WW1 and WW2 English , WW2 American instruments available as trade items. Thanks
By: 7th April 2019 at 09:11 Permalink - Edited 7th April 2019 at 09:12
-We (Ferrymead Mosquito Project) have the following radio boxes available for trade:
A1134 Intercom amplifier, including crate and most of the mountings (the bungees on the other side will be fitted, but batteries not included):
R1155 HF Receiver (4 off, one very original and 3 hacked about variously). We can include some of the Jones plugs for the set and the connector to the power supply
Rebecca Mk IV Indicator unit Type 208 10QB/6130
We are after:
R.3121 or R.3090 IFF Transponder (the US version SCR 595/695 would do)
Type 90 IFF Aerial
A1271 Beam Approach Amplifier
Beam Approach Aerial 10B/496
Voltage Control Panel Type 3 or Type C3
UV Lighting Resistance Box 5C/1879
(We also have a wants list of smaller items). We are in NZ, but the problem is unlikely to be insurmountable. Please PM me if you have any interest in these items and anything to trade with.
Cheers
By: 8th April 2019 at 21:43 Permalink
-We need a DC3 / C47 throttle box and both sets of rudder pedals. Or indeed something that looks similar, it’s for a studio mock up. Any offers most appreciated!
By: 9th April 2019 at 22:14 Permalink - Edited 9th April 2019 at 22:15
-I'm looking for B-17 turbos..bit of a long shot but I have a friend in Phoenix, USA, who would like some. Thanks in advance!
By: 10th April 2019 at 22:24 Permalink
-Hi
still after a 6H356 autopilot controller for our Stirling
see pics here: https://forum.keypublishing.com/forum/historic-aviation/3854129-short-stirling-6h-356-autopilot-controller
john
By: 2nd June 2019 at 11:15 Permalink
-I have a few Hurricane fuselage (fish) plates for trade. Two from joint A two from D and two from further back in rear fuselage. Good for static cockpit build. Would consider swap for other plates from joint AB-GH cockpit section or tube end fittings from same section. Can email pics if you send me a p.m. and let me know what you have got. Thanks.
By: 3rd June 2019 at 12:34 Permalink
-Looking for a modern match to the Spitfire Control column chain Vickers - 22433/161 please.
By: 3rd June 2019 at 14:47 Permalink
-I’m looking for two air inlet ducts similar to the one pictured. This one is from a Chipmunk and ideally I’m looking for something very slightly more tapered at the rear end and around seven inches long - although this type would work just as well.Thanks in advance.
Up at NELSAM, we have a number of surplus Chipunk engine panels that may have said item attached. I will have a look in the storage container at the weekend
By: 3rd June 2019 at 14:50 Permalink
-That would be appreciated Thunderbird!
By: 14th July 2019 at 10:34 Permalink
-After an early set of Spitfire firewall engine mounts please.
By: 14th July 2019 at 17:45 Permalink
-Rather than ask for something specific, we're after anything Stirling related either to buy or to have loan of if possible. Anything that can give us information to take the project forward such as crash relics etc as even the smallest parts can be of use
TIA
John
By: 15th July 2019 at 09:55 Permalink
-The Lashenden Air Warfare Museum are seeking parts & plans for the Fa330 to aid the restoration of their example (100549). we are seeking the following items:-
Instrument panel, instruments, pitot head, rotor blades, parachute pack, parachute pack mounting & the seat harness.
Any help appreciated many thanks in advance
By: 4th August 2019 at 09:24 Permalink
-Complete Hawker Hurricane joint D going spare. Port side with additional D-D plate still attached. Not bent or damaged. Looking to swap for Hurricane or Spitfire parts. PM me if interested
By: 17th January 2020 at 15:38 Permalink
-Not sure if there is a 2020 thread running for this so posting here:
On the lookout for a either an overall manual or IPC for a Martin Baker MK9 Type II (Jag fit) seat.
Always interested in pretty much any other Jag bits and pieces, cockpit or airframe related.
Posts: 282
By: Nicko - 2nd December 2018 at 00:44 - Edited 2nd October 2019 at 11:40
I posted a load of wants and parts available for trade at the time when the Forum was going through a really hard time - coming to terms with its new incarnation - and I think that my post got no airplay at all, and the whole thread seems to have disappeared into the past. So I am trying again!
I'm looking for parts for single-seat Vampire and DH.108 projects:
Smiths Desynn Position Indicator ('Transmitter'), eg 170FL, 315FL, as shown below.
Undercarriage Indicator, nose wheel type, 6A/1009
(Burner) Pressure gauge, 6A/1579
Oil Pressure, 6A/1563
Artificial Horizon HL5, 6A/2717
Brake Pressure triple gauge, G6A/2157 (303PG)
Cabin pressure, 6A/1749
Sensitive ASI Type F-1, 106A/1110
Fuses 5C/881, 10 amp, type S
Fuses 5CZ/550, 40 amp, type E
Radio Control Unit Type 295, Y10L/151
SCR-695 Selector Unit Type BC-965-A - Y110L/59A
SCR-695 Control Unit Type BC-958-A - Y110L/56A
Vampire Fuel Panel (early type to suit 5 fuel gauges & clock) - B001893A, B00593 or B00597 - Fuel gauges not required
Cross mounting tube for instrument panels - B0049A
Also interested in most single-seat Vampire parts ('anything'); partnumbers such as A00, B00, N00 series, etc.
[ATTACH=JSON]{"data-align":"none","data-size":"small","data-attachmentid":3842491}[/ATTACH]
I have the following to trade - multiples of some:
Oxygen Cylinder Pressure - US Army Type K-1
SHP x 100 - 6A/33?? - Gannet?
Steering indicator Mk.1 - 9/979 - Beaufort
0-70 Carb Temp - 606-T-86 - Ventura, C-47A
Oxygen lb x 100 - KDG Crawley
Fuel 0-40 Gals - 1867FG/SB
Fuel Pressure 0-25 - AN5771-1 - Beaufort, Airacobra, P-39D, C-47, Hudson, etc
Rad Temp 0 - 350C - 77MV/SB
0-120 psi Oil Pressure - 260PG/SB
0-350C Cyl Temp - G6A/2125-002
Cabin Heat & Pressure - G6A/2713-002
Boost -4 to +24 - 6A/2683
Cabin height - PW/73AM
Radio Compass Indicator I-82-A - Bendix/US Army
Cabin Pressure - 417PG - G6A/500213
Astro compass element
Gun firing air pressure - G6A/3338 - AHO3386 - Anson
Pressure 0-150 psi - 6A/2235
Gallons 0-400 - G6A/500226, 504FG
Gallons 0-500 - 6A/1215
Gallons 0-300, No.3 Tank - 6A/?788, 799FG
Gallons 0-137, Main tank - 6A/1871, 744FG
Air pressure, 0-600 psi, Mk.VIIIF - 6A/1596
Happy to provide more photos (eg backside of instrument) for any of these by request.
Cheers.
[ATTACH=JSON]{"data-align":"none","data-size":"thumb","data-attachmentid":3842492}[/ATTACH][ATTACH=JSON]{"data-align":"none","data-size":"thumb","data-attachmentid":3842493}[/ATTACH][ATTACH=JSON]{"data-align":"none","data-size":"thumb","data-attachmentid":3842494}[/ATTACH][ATTACH=JSON]{"data-align":"none","data-size":"thumb","data-attachmentid":3842495}[/ATTACH][ATTACH=JSON]{"data-align":"none","data-size":"thumb","data-attachmentid":3842496}[/ATTACH]