Read the forum code of contact
By: 25th March 2018 at 15:19 Permalink - Edited 1st January 1970 at 01:00
-You could try Merlin Pete (as he is known on here) I believe his company is Flight Engineering (Leeds) or else Retro Track & Air but check the depth of your pockets prior to contacting them......
By: 25th March 2018 at 19:41 Permalink - Edited 1st January 1970 at 01:00
-If this is a non flying carb, you could use these ebay:
https://www.ebay.co.uk/itm/253516707771
Or you can make them using the parts as pattern.
DAI
By: 26th March 2018 at 00:21 Permalink - Edited 1st January 1970 at 01:00
-Thanks, I will check both.
Posts: 2
By: wheellock - 25th March 2018 at 10:51 - Edited 2nd October 2019 at 11:40
Hi All, I am looking for info for this little bit of sculpture. It is an AVT40SUX216, anti-g carb. It has a small plate locking the mixture cam in place (noted by the red arrow in the bottom pic) and was attached to a supercharged Merlin.
I am looking for a gasket set or drawings of the gaskets.
[ATTACH=CONFIG]259596[/ATTACH]
[ATTACH=CONFIG]259597[/ATTACH]