Read the forum code of contact
By: 11th April 2015 at 23:16 Permalink - Edited 1st January 1970 at 01:00
-Hi Paul....is that 6A/616 ?
If so its not correct.
Cheers Mike
By: 12th April 2015 at 02:27 Permalink - Edited 1st January 1970 at 01:00
-Hi Mike
It's for an Aussie Mk31 Lincoln, I don't know the stores ref as info on these is very scarce, I'm mainly working from photos and a little Lanc stuff. What part is incorrect.
Thanks Paul
By: 12th April 2015 at 02:29 Permalink - Edited 1st January 1970 at 01:00
-Ah, I will try and investigate...
By: 12th April 2015 at 05:15 Permalink - Edited 1st January 1970 at 01:00
-Hi Mike
Here is what the BFP looks like, it even has a small bit cut out of the top edge. I get the feeling that these were only used in the Mk31 with the Mk30's having a curved top and different instrument arrangement. Actually my main concern at the moment is to make sure the 3 mounting holes are in the correct place so that I can fit it into my main panel later without any problems.
Cheers Paul
By: 12th April 2015 at 08:59 Permalink - Edited 1st January 1970 at 01:00
-PM sent.
Posts: 832
By: ozjag - 11th April 2015 at 15:59
G'day everyone. I just wanted to check I have the correct dimensions for a flat topped BFP, can someone confirm please.
Width 12", Height 10 5/8", Bottom mounting hole centres 1" from the side, 1" from the bottom and therefore 10" apart, Top mounting hole centre 10" from the bottom and 4 3/4" from the right hand side.
Thanks Paul